Product Category
Technical Requirement
Current Location: Home > Technical Requirement
Adding dry powder
1. For wettable resin or pigment, choose BT-838S, BT-840 or BT-860 and add directly to accomplish in-situ incorporation
1) Solvents and vehicle, mix
2) BT organobentonite powder (mix for 10 min)
3) Polar activator (10 min)
4) Surfactant
5) Pigment (disperse)
6) Dilute
2. For non-wettable resin, addition sequence is as follows:
1) Solvent and mixed solvent
2) BT organobentonite powder (mix for 10 min)
3) Polar activator (mix for 5-10 min)
4) Resin (mix)
5) Surfactant
6) Pigment (disperse)
7) Dilute
This method is suitable when there is large amount of solvent for use when while molding.